2-Port 10/100/1000 Base-TX Ethernet PCI Express Adapter FC 5767 CCIN 5767 for sale IN DELHI

Contact info

http://admaya.in/1372253

Phone : 08041530751

Email : info@serversrent.com

https://www.ibm.com/support/knowledgecenter/8202-E4D/p7hcd/fc9055.htm
The PCIe 2-Port 1GbE TX adapter is a full-duplex, dual port, gigabit Ethernet adapter. This adapter is the regular-height adapter and FC 9056 is the low-profile adapter. Both adapters are the low-priced equivalents of the FC 5767.
The adapter interfaces to the system via a PCIe bus. This adapter can be configured to run each port at 10, 100, or 1000 Mbps data rates. The adapter connects to a network using a 4-pair CAT-5 Unshielded Twisted Pair (UTP) cable for distances of up to 100 meters (328.08 feet). This adapter is PCIe x4 capable and conforms to the PCIe 1.0a standard. The adapter supports AIX® Network Installation Management (NIM) boot capability. The adapter conforms to the IEEE 802.3ab 1000Base-T standard. The adapter supports jumbo frames when running at the 1000 Mbps speed. The adapter does not support a speed of 1000 Mbps speed in half-duplex (HDX) mode.
The adapter provides the following features:
• Supports interrupt moderation to deliver increased performance while significantly reducing processor utilization
• Supports dual port operation in almost any PCIe slot, except x1
• Supports auto-negotiation, full-duplex only
• Supports integrated media-access control (MAC) and physical layer (PHY)
• Supports Fast EtherChannel (FEC) with the existing software
• Supports gigabit EtherChannel (GEC) with the existing software
• Supports IEEE 802.3ad (Link Aggregation control protocol)
• Supports IEEE 802.1Q VLANs
• Supports IEEE 802.3 z, ab, u, x flow control support
• Supports IEEE 802.1p
• Supports IEEE 802.3ab for TX
• Supports TCP checksum offload transmission control protocol (TCP), user datagram protocol (UDP), Internet Protocol (IP) for IPv4 and IPv6
• Supports TCP segmentation or large send offload
• Supports EEPROM-SPI and single EEPROM
• Supports interrupt levels INTA and MSI
• Hardware certifications FCC B, UL, CE, VCCI, BSMI, CTICK, MIC
• Network Controller (MAC) Intel 82571EB
• Compliant with European Union Directive 2002/95/EC on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment
FRU number: 46K6601* - *Designed to comply with RoHS requirement
I/O bus architecture
• PCI Express V1.0a compliant
• Bus width x4 lane PCI Express, operable in x4, x8, x16 slots
• Bus speed (x4, encoded rate) 10 Gbps unidirectional; 20 Gbps bidirectional
Busmaster: Yes
Maximum number: For the maximum adapters supported, see the PCI adapter placement topic collection for your system.
Adapter size: PCIe short form
Connector information: Two RJ-45 ports, Two LED adapter status indicators per port, for link activity and speed
Cabling: Customers supply their own cables. For best performance, use cables that meet CAT5e cabling standards, or later.


For more details, contact us:
Mobile: 09886789678/080-41530751
E-mail: info@serversrent.com
Website: www.serversrent.com
info@serversrent.com
No 32, 2nd Main, 7th Cross,
Muniyappa layout, Garebhavipalya,
Bangalore-560068.

Posted on : 09/11/2018, #, Edit

It is ok to contact this poster with commercial interests.

« 1 Gigabit IVE daughter card FC 5624 CCIN 1819 for sale IN DELHI2-Port 10/100/1000 Base-TX Ethernet PCI-X Adapter FC 1983 5706 CCIN 5706 for sale IN DELHI »