PCI-X DDR External Dual – x4 Port SAS Adapter FC 5912 CCIN 572A for sale IN DELHI

Contact info

http://admaya.in/1372321

Phone : 08041530751

Email : info@serversrent.com

https://www.ibm.com/support/knowledgecenter/POWER7/p7hcd/fc5912.htm
The Peripheral Component Interconnect-X (PCI-X) DDR External Dual – x4 Port SAS Adapter is a low-profile adapter for high-performance and high-density, serial-attached SCSI (SAS) applications. The adapter provides two mini SAS 4x connectors, which allow the eight physical links to be used in various narrow and wide-port configurations. The adapter is a 64-bit, 3.3 V, bootable SAS adapter that provides RAID 0, 5, 6, and 10 capability. Some RAID level support is operating system dependent. The adapter provides RAID 0, RAID 5, RAID 6 and RAID 10 for AIX® and Linux. Under the IBM® i operating system, mirroring and data spreading is provided by the operating system and RAID 5 and RAID 6 is provided by the adapter.
The adapter does not have write cache. (The write performance of RAID level 5 and RAID level 6 may be poor on adapters which do not provide write cache. Consider using an adapter which provides write cache when using RAID level 5 or RAID level 6.)
The adapter can address up to 48 SAS disk drives, although the actual number of drives in a system is subject to the physical placement limitations of the system. Externally attached devices are designed to run at a data rate of 1.5 Gb/s for Serial Advanced Technology Attachment (SATA) devices, and 3 Gb/s for SAS devices. This card supports RAID and non-RAID DASD, tape, and optical devices. Feature 5912 supports the multi-initiator and high availability configurations.
Important: See the SAS RAID controllers for AIX, SAS RAID controllers for Linux, or SAS RAID controllers for IBM i topics for more information and important considerations for multi-initiator and high availability or dual storage IOA configurations
Adapter FRU number:5912: 44V4413*
* Designed to comply with RoHS requirement.
I/O bus architecture:PCI-X DDR
Slot requirement:One available PCI-X slot
Cables:SAS device attachment requires specific cables that are provided with the subsystem or device features being attached. Special cabling is required for multi-initiator and high availability configurations. See Serial attached SCSI cable planning.
Voltage:3.3V
Form factor:Short, low-profile
Maximum number:For the maximum adapters supported, see the PCI adapter placement topic collection for your system.
Attributes provided
• Two external mini SAS 4x connectors provide attachment of SAS and SATA device enclosures
• SAS Serial SCSI Protocol (SSP), Serial ATA Tunneling Protocol (STP), and Serial Management Protocol (SMP)
• RAID 0, 5, 6, 10
• The write performance of RAID level 5 and RAID level 6 may be poor on adapters which do not provide write cache. Consider using an adapter which provides write cache when using RAID level 5 or RAID level 6.
• Concurrent firmware update
• Removable media device supported (Removable media is not supported in multi-initiator and high availability configurations)
• 440 - 500 Mhz PowerPC® (PPC)
• Support for multi-initiator and high availability configurations (5912)





For more details, contact us:
Mobile: 09886789678/080-41530751
E-mail: info@serversrent.com
Website: www.serversrent.com
info@serversrent.com
No 32, 2nd Main, 7th Cross,
Muniyappa layout, Garebhavipalya,
Bangalore-560068.

Posted on : 09/11/2018, #, Edit

It is ok to contact this poster with commercial interests.

« PCIe Dual - x4 SAS Adapter FC 5901 CCIN 57B3 for sale IN DELHIP/N: 74Y2995 IBM 10GB Dual Port IVE/HEA SR 1830 Integrated Virtual Ethernet Card for sale IN DELHI »